Apparently they made a V2 for the Raspberry Pi, this time with mount holes, which is one thing the first one was lacking.
edit: I'd love to have a case for this, but I'd want it flush with at least the audio jack side.
I wonder if I could solder a battery right there to the power input where I wouldn't have to move the micro plug, so people could easily use the design, but most likely not or not easily.
It would probably be better to just use other jacks on the case and use short cables running to the board itself, that way I don't have to modify the board at all.
Edit: It looks like when they made the B+ they had also added holes (should have kept up with this), and the extra USB ports, so basically the differences are now just faster and more RAM. I'll have to go find the dimensions and see if they're the same, if so that'd be awesome.
Edit2:
RPi said:
This has an identical form-factor to the existing Raspberry Pi 1 Model B+, but manages to pack in both the new BCM2836 and a full 1GB of SDRAM from our friends at Micron. All of the connectors are in the same place and have the same functionality, and the board can still be run from a 5V micro-USB power adapter.
I'm giddy now.
edit3: even more so if I could power and charge via the standard micro port using the header like this: