Last cable finally came in so the PC is more or less finished. There are a lot of problems but I'm really not interested in fixing any of it at this point.
https://gfycat.com/forcefulheartfeltaltiplanochinchillamouse
Notes:
-The tubes came out like ***. I used the corsair satin hardline and the material was a pain in the *** compared to the tubing I've used before. Bubbled and bent within a very very small margin and even tiny mistakes ruined the satin finish and made it look like ***. The bends and cuts are completely ***as a result. In the end it was functional so this is what I've got.
-I *** up when installing the PSU plate. The cable leading from that rgb strip to the back of the case slipped my mind, so mow it looks like ***.
-other cables toward the back I can't do much with. The USB connectors and temperature probes are more or less set in their positions. They don't look too awful though.
-Cable training on the Mobo power cable is rough. These mod flex cables have an awkward stiffness level of "cooked spaghetti" when you want rigidity and "rebar" when you want to try to make a bend. It's more or less as good as I could get it to be while still being able to close the case.
Overall I'm OK with how it ended up but it could have been better. Next build I will not use this tubing again and I'm going to try some other strategies with the cabling. Ultimately it achieves its primary purpose; silent, stable temperatures with no throttling under load with a heavy OC, and no fear of baking the VRAM off I'd my 3090 while mining.
Also since the camera blows the *** out of the plates, here were the designs. They are rendered beautifully to the naked eye.
PSU Shroud Plate
GPU Bracket/PCIe Slot Cover
GPU Backplate